PCB Lead Cutters & Brush Cleaners
/
KA-66 KA-66
Automatic PCB Lead Cutter
The KA-66 is a fully automatic conveyorized PCB lead cutter engineered for continuous in-line trimming after wave soldering (0–3 m/min). Featuring spring gripper claws, anti-warping support pins, and a 3/4 HP spindle motor, it effortlessly trims heat-distorted boards without damaging traces.
KA-83 KA-83
PCB Brushing Machine - Hand Holding
The KA-83 is an extra-large manual-feed PCB lead trimmer specifically built for oversized circuit boards up to 600 × 400 mm. Equipped with a heavy-duty 1 HP high-torque spindle motor, it effortlessly cuts through dense multi-layer boards and heavy component leads with superior rigidity.
NK-250 NK-250
Tungsten Carbide Steel Blade (NK-200 / NK-250)
The NK-250 is a premium micro-grain tungsten carbide circular cutting blade (250 mm diameter; also available in 200 mm as NK-200) engineered for KA-series PCB lead trimmers. Offering exceptional hardness and wear resistance, its precision-honed cutting edge guarantees razor-sharp, burr-free cuts.
KA-8 KA-8
PCB Lead Cutter, by hand pushing
The KA-8 is an economical manual-feed PCB lead cutter designed for lead trimming after wave soldering, driven by a 1/2 HP 4,500 RPM spindle motor. Cutting leads down to 1.0 mm height for boards up to 400 × 270 mm, its interlocked safety shield ensures safe and reliable batch trimming.
KA-82 KA-82
Desktop Roller Brushing Machine (incl. KA-82W)
The KA-82 is an expanded manual-feed PCB lead cutter featuring an enlarged precision ground worktable accommodating circuit boards up to 500 × 330 mm. Driven by a vibration-free 3/4 HP 4,500 RPM spindle motor, it provides clean, burr-free trimming down to 1.0 mm lead height for large assemblies.
KA-680 KA-680
Blade Re-sharpening Machine
The KA-680 is a fully automatic in-line PCB underside copper brush cleaning system featuring variable-speed motorized conveyor rollers. Installed directly downstream of lead cutters or wave soldering ovens, it cleans board bottoms continuously without manual intervention.
KA-22 KA-22
Automatic Twin Blades PCB Lead Cutter
The KA-22 is a flagship automatic dual-spindle PCB lead cutter featuring integrated motorized copper brush cleaning for extra-wide boards up to 420 mm wide. Its rough-cut and finish-cut dual blades balance mechanical load, while the rotating brush actively sweeps away trimmed lead debris and solder dross.
KA-B80 KA-B80
Automatic PCB Brushing Machine
The KA-B80 is a dedicated manual PCB underside brush cleaning machine equipped with a motorized high-density copper wire brush spinning at 600 RPM. Designed for post-wave-soldering PCBA finishing, it sweeps away adhered solder beads, metal burrs, and flux residues to prevent short circuits.
KA-B6 KA-B6
Automatic PCB Brushing and Lead Cutting Machine
The KA-B6 combines the automated conveyorized lead cutting of the KA-66 with a synchronized motorized copper brush cleaning station. Boards are trimmed and immediately brushed to remove residual solder dross and loose lead fragments in a single pass, guaranteeing pristine PCBA cleanliness.
No matching models found
Please clear or adjust filter selections. Custom tooling and machines are available.